Maintenance

Treadmill Daily Maintenance:
2016-08-21

Electronic treadmill uses high quality running belt with low friction and high strength. Running deck with double shock absorption system makes exercises comfortable and smooth. 

Cleaning:

Appropriate cleaning prolongs the treadmill’s life greatly. Running belt and pedals should be wiped frequently to avoid dust and dirt. Soap water would be suitable. Be aware not to let the water run below the belt or into the deck.

Lubrication:
Running deck and belt should be lubricated with special lubricant.
 
Suggestions:
 
Less than 3 hours of usage per week-every 6 months
3-6 hours of usage per week- every 3 months 
More than 6 hours of usage per week-every month.
 
Lubrication instruction: Loosen the bolts at the end of treadmill, lift the belt by 10-15cm, pour lubricant onto the roof of running deck smoothly, tighten the belt after it’s done.
 
DO NOT overuse lubricant. Only appropriate lubrication can prolong treadmill service life.
 
Estimate Friction 
 
Uncleanness and lack of lubricant can both cause the increase of friction, which may result in damage of motor and control pad.
How to estimate:
 
1. Under power-off condition, it’s difficult or not able to run the belt;
 
2. When operated with load, treadmill stops immediately when safety switch is pulled.
 
3. Too much friction may damage the motor or the control pad.
 

 

Adjust Running Belt:
Treadmills have gone through belt adjusting when leaving the factory and  installing on-site. However, belt loose may happens after being used for some time thus requires customers to adjust it by themselves. Neither too loose or too tight belt is good for the maintenance of the treadmill. Generally, the sides of running belt can be lifted by 5-6 cm.
How to estimate:
Adjust the bolts at each side of the belt with proper tools until there is no feeling of standstill 
 
Attention: The tightness of running belt should be adjusted properly according to your need. 
Adjusting instruction:
Adjust the bolts at each side of the belt with proper tools until there is no feeling of standstill 
 
Attention: The tightness of running belt should be adjusted properly according to your need.